Specification of DA-21 Five functions electric hospital bed
Ⅰ. Technical parameter:
Outer dimensions (Side rails up): L2200*W1035mm(±10mm)
Usable sleeping platform: L1980*W900mm(±10mm)
Bed height: H455-785mm(±10mm)
Maximum backrest: 0~70°±2°
Maximum knee rest: 0~25°±2°
TR/ATR: ±0~ 12°±2°
Height of side rails(above mattress platform) : 370mm(±10mm)
Safe working load: 260Kg, clearly marked onnameplate on the bed
Protection against water and dust: IPX4
Voltage:100~240V/50HZ/60HZ
Certificates
Pukang Medical is certified according to European norms and quality system:
ISO 9001:2015, ISO 13485:2016, ISO14001:2015
Products are manufactured according to European norms for medical technology and hospital beds IEC60601-1, IEC60601-1-2, IEC60601-2-52:2009
Ⅱ. Material:
1, The main bed frame bed frame made of mild steel ERW rectangular tubes with lead-free epoxy coating finish.
2, Bed headboard: made of HDPE material by blow molding process, plug type assembly, easy to disassemble, with knob-type locking device, higher strength, single assembly design, no misoperation .
3, Side rail: It is made by HDPE material blow molding process. The structural parts are made by die-casting aluminum alloy, special-shaped steel pipe, high-quality carbon structural steel cold-rolled steel plate, and installed by bolt.
4, Bed surface: the use of sheet metal punching plate surface, circular punching, beautiful appearance. It is made of high-quality cold-rolled steel plate produced by large steel mills such as Hebei Steel Group and so on. The thickness of the plate is 1.0mm. The plates are connected by a 5 mm thickness connecting piece with aφ10mm nylon washer between the connecting pieces and fastened with bolts. Backboard made of phenolic resin which can work with X-ray(optional).
5, Adopt famous brand complete sets of electrical equipment for beds using, including linear motors, control box, hand-held controller, power cords and batteries.
6, Side rails, headboard, footboard, and electronic components made of toxin-free materials.
Ⅲ. The function:
1, Safe working load: 260Kg
2, The overall lifting height: Within H455-785mm(±10mm).
3, The back board folding angle: 0~70°±2°
4, The thigh board folding angle: 0~25°±2°
5, TR/ATR: ±0~12°±2°
6, Auto-contour to prevent the patient from sliding.
7, The height from top of siderail to bed platform is 370mm(±10mm)
8, Adopt famous brand motor, which is easy and flexible to operate and has no noise. With backup battery, the number
of operations in the case of power failure is ≥10 times, with visible indicator in controller for insufficient or low charge. With anti-pinch function, there is no unacceptable risk when the operator or patient's limb enters the movable space of the motor.
9, Side rail:
① Split one long and short side rail articulated together at two sides of the bed for patient safety.
② It can be automatically locked when raising, and each side rail can bear more than 50KG.
③ Side rail safety switch design, placed under the guardrail to avoid misuse of the patient;
④ Equipped with gas spring for easy operation and slowly down, that all rails descend to the middle of the mattress or below.
⑤ The steel structure of the side rail base is welded on the bed to ensure safety.
⑥ The 4-pieces side rail has angle indicator that allows the caregiver to quickly and easily to see the backrest angle and Trend and reverse position of the bed.
⑦ Membrane-Type integrated Control (located on the outside and inner of side rail):
raise and lower the bed(outside only), raise and lower the backrest, raise and lower the kneerest, and function lock.
10, The detachable headboard and footboard with integrated handle to push the bed, it have moderate weight, high strength, durability and beautiful appearance. Plug type assembly, easy to disassemble, reliable locking, single assembly design, no misoperation.
11, Four holes in each corner reserved for telescopic SS IV pole, it can also be used for lifting pole and to attach an orthopedic traction accessory. IV pole have 4 hooks, max loading is 11kg.
12, At the 4 corners of the bed, there is an diameter 75mm anti-collision wheel and thickness is 46mm. The material is made of plastic. The bumper wheel protrudes beyond the bed, which can effectively ensure that the bed will not be hit by the building during the running.
13, Equip small hand-held controller for patient and big and-held controller for nurse, clearly visible function, control the position of the whole bed to provide a comfortable position for the patient.
Nurse controller operation for the following functions
a. Raise and lower the bed
b. Raise and lower the head
c. Raise and lower knees
d. Trendelenburg
e. Reverse Trendelenburg
f. Auto contour
g. Electric CPR
h. One button exit bed position
i. One button cardiac chair position
j. Bed lock function
K. Floor light
14, The bed backboard has the function of transmitting X-rays, and is equipped with X-Ray cassette holder for the convenience of caregiver(optional).
15, Extension of the bed(optional): The integrated bed extension adjusts the mattress platform length 0~200mm according to the individual patient’s height.
16, Auto regression (Pressure ulcers protection)
It equipped with the auto regression system which extends the space when positioning the bed in the pelvic and sacral area and significantly reduces pressure on the skin in this zone. At meantime this system will consequently reduces the risk
of the formation of pressure ulcers.
17, Casters
①Four diameter 125mm(5 inch) central control casters
②Precise ball bearing is built in the wheel and the rotating head of casters. It is wear-resistant, silent, anti-winding; The caster cover which made of synthetic material is dust-proof and beautiful, and it is acid and alkali resistant and can be disinfected at high temperature. The load test has passed the European industry standard EN12531.
③Function:
1), with central type brake, unbrake for all four casters and steering function.
2), The brake does not need maintenance, adjustment. Single wheel static load 125Kg, dynamic load 100～110Kg.
④Central brake system: It adopts all-metal matching, compact structure and reliable braking.
⑤The fifth caster is optional
18, Linen Shelf(optional): The linen shelf at the bottom of foot end also stores the big hand-held controller.
19, There are 2 hooks in each side for drainage bag.
20, Vascular position (leg or calf in horizontal position), shank board can be adjusted by adjustable pull rod hinge.
21, Manual/ Electric CPR: CPR is equipped with damping device, which can let the back rest fall down slowly to ensure the safety of the patient when the power is off, the whole process can be single hand operation. Manual CPR handle at both side of the patient’s head end.
22. Four slots or devices on both sides of the bed to use patient retention straps.
23. Four mattress retention devices to help to support the mattress in proper position.
24. Hospital-grade foam mattress(optional):
Corresponding to the shape and usable surface area of the bed, thickness 150mm
Mattress cover:PU waterproof, breathabl eand pressure-relief (tear-resistant) material, antibacterial and flame-retardant treatment, compatible with hospital-grade detergents
Mattress filler: High density sponge(35Kg/m3).
25. ACCESSORIES(optional)
A.1. Support for oxygen tank
A.2. Traction frame
A.3. Patient help with handle
