Welcome to Hebei Pukang Medical Instruments Co.,Ltd

Hot Search: DA-3 A-5 DA-2 E-3 E-8 

DA-2 Multifunction Electric ICU Bed (C)

Product Kinds: Universal electric bed
Name:DA-2 Multifunction Electric ICU Bed (C)

Standard Configuration
1.Split side rails: The 4pcs PP side rails provide the patient with protection against falls.
2.Removable mattress platform: The mattress platform is easy removable and easy for sterilization.
3.Integrated scales system: The in-bed scales control panel located under the foot end is protected against impacts.
4.Central nurse control system: The nurse or supervisor can adjust all the positions and find the comfortable and proper positions for the patients
5.Control in the side rails: Controls in the side rails increase the patient’s independence so that the patients can operate it according to the self-requirement
6.Bed extension: The integrated bed extension adjusts the mattress platform length to the individual’s height
7.Linen shelf: The linen shelf at the bottom of foot end  also stores the supervisor panel
8.H/F boards locks: The board locks prevent accidental removal of the bed boards when steering or handing the bed
9.X-ray cassette holder: The holder’s special sliding construction allows the cassette to be comfortably inserted beneath the mattress platform from the side of the bed
10.Manual/Electric CPR: The CPR is easy and convenience to operate that is one key control. And the manual CPR is equipped with damping device, which can let the back rest fall down slowly to ensure the safety of the patient when the power is off, the whole process can be single hand operation.
11.Angle gauge: The angle gauges of side rails in the head and foot direction show the angles of the backrest and tilt of the whole bed mattress platform respectively
12.Protective corner bumpers
13.Lifting pole and infusion stand holes
14.Mattress holders
15.Four 125mm diameter castors with central locking system

Certificates
Pukang Medical is certified according to European norms and quality system:
EN ISO 9001:2008,EN ISO 13485:2003 EN ISO14001:2005
Products are manufactured according to European norms for medical technology and hospital beds
EN 60601-1,EN60601-1-2 ,EN ISO 14971,93/42/EEC,90/384/EEC EN60601-2-52:2009

Recommended products
HEBEI ICP NO. 05001500 COPYRIGHT OF 2011 HEBEI PUKANG MEDICAL INSTRUMENTS CO. LTD ALL RIGHTS RESERVED